Karljsw Posted April 23, 2014 Share Posted April 23, 2014 Hi Guys Im in need of a radiator support cross-member with very little rust preferably none as the repair certifier does not like rust! Let me know what you've got Cheers Karl Quote Link to comment Share on other sites More sharing options...
Retro Z Posted April 23, 2014 Share Posted April 23, 2014 Karl. I just bought another 2 zeds. I will check on the weekend if the crossmembers are any good and i will let you know..this time hopefully there is no rust Quote Link to comment Share on other sites More sharing options...
Scoota G Posted April 23, 2014 Share Posted April 23, 2014 Karl. I just bought another 2 zeds. As one does! Quote Link to comment Share on other sites More sharing options...
Retro Z Posted April 23, 2014 Share Posted April 23, 2014 Mark, between me and you we probably buy half of all the rolling shells that come up for sale here in Vic. Quote Link to comment Share on other sites More sharing options...
Brabham Posted April 23, 2014 Share Posted April 23, 2014 Add me and everyone else here to those on the lookout for a rust free crossmember if you end up cutting the other shell Tai I'll go next in line. Cheers Quote Link to comment Share on other sites More sharing options...
Karljsw Posted April 23, 2014 Author Share Posted April 23, 2014 There's that one for the Queensland folk http://www.gumtree.com.au/s-ad/toowoomba-4350/cars-vans-utes/1976-datsun-260z-coupe/1044585200 Was looking at getting the shell just for the support haha Dunno if its a club members one? Cheers Tai, ill await the hopefully good news Quote Link to comment Share on other sites More sharing options...
Retro Z Posted April 23, 2014 Share Posted April 23, 2014 if you end up cutting the other shell Tai I'll go next in line. Cheers No worries i will let you both know. Quote Link to comment Share on other sites More sharing options...
Karljsw Posted May 12, 2014 Author Share Posted May 12, 2014 Bumpity, since finding a straight rust free cross member is rather difficult and My Mum is starting to get annoyed at the lack of progress on the datsun. Does or could anyone give me some accurate measurements of the crossmember so i can get one fab'd up over here? I've got a 1m section of 60mm x 60mm x 4mm SBS that I was planning on using to make one up and i have a mate who works as a welder. I know the steel is slightly the wrong dimensions, but as far as im concerned its close enough (near as makes no difference 5mm to wide and 2mm too high) and the original being something close to 2mm thick another 2mm will add more strength. Cheers Karl Quote Link to comment Share on other sites More sharing options...
Scoota G Posted May 13, 2014 Share Posted May 13, 2014 Bumpity, since finding a straight rust free cross member is rather difficult and My Mum is starting to get annoyed at the lack of progress on the datsun. Does or could anyone give me some accurate measurements of the crossmember so i can get one fab'd up over here? I've got a 1m section of 60mm x 60mm x 4mm SBS that I was planning on using to make one up and i have a mate who works as a welder. I know the steel is slightly the wrong dimensions, but as far as im concerned its close enough (near as makes no difference 5mm to wide and 2mm too high) and the original being something close to 2mm thick another 2mm will add more strength. Cheers Karl What if i made a template of one out of cardboard and sent you that over? Can't have your mum goin crook! Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted May 13, 2014 Administrators Share Posted May 13, 2014 You might want to be patient and hold out for Nato to finish his. http://www.viczcar.com/forum/index.php/topic,12469.0.html I see you PM'd him about it, but I'd go new metal over old if possible . Quote Link to comment Share on other sites More sharing options...
Karljsw Posted May 14, 2014 Author Share Posted May 14, 2014 That would be awesome if you could Mark Quote Link to comment Share on other sites More sharing options...
Scoota G Posted May 14, 2014 Share Posted May 14, 2014 Should be easy enough but may take me a week or so to get it done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.