WTB injectors

[navanskyine]

hey guys ive posted to other places for this just in case anyone got any  VL turbo injectors if so hit me up asap

[navanskyine]

or turbo injectors for a l28

[PZG302]

I have some 280zx injectors somewhere just have to.check they are the same as turbo.

[navanskyine]

they will work for my engine

[PZG302]

I'll.dig them out over the weekend and let you know. I should have a full set as I know I had a spare set.for.the zed.

[dat2kman]

Nup, stockos wont work, duty cycle too high, theyll burn out.
Go and buy some fresh ones.

If you need good fuel supply, i got a set of 480cc injectors that will fit, you just have your tuner pull back group fire sequence time interval, but at least you can determine where in the duration cycle of the cam you want them to fire and for how long.

Vl turbo injectors will be on upper end of duty cycle, i think they are around the 280 cc mark, stockos are around 180 cc

[navanskyine]

pm the pices of them shane

[navanskyine]

still need some guys

[CH105]

I've got 6 stock 280zx turbo injectors if youre interested, I had them refurbished and have the flow reults that i can send to you. My project went another way so I didn't use them.

My only caveat is that i dropped one of them, ive no idea which one as there was no visible damage and this was some time ago. I would therefore recommend if you bought them to check them over before use, could be nothing wrong but best to be sure, and is something you should do anyway when buying second hand injectors.

Make me an offer if of interest.

[dat2kman]

188 cc injectors set of 6 at $300 have been flowed and cleaned, ready to install

480cc injectors set of 6 at $400 original Bosch units , used.   Both sets ready now.

Located Brisbane can put in a padded bag and post if anyone else is keen!

Repco or Bursons can order in new ones, will take a few days, but  you said ypu dont want to spend the $$$ on brand new ones, at retail price., as you told me?

Or go to a local wrecking yard and unsrew a set off of something, could be lucky, they might fit!

Ben, i already gave you a "discounted"price, but if you can get them elsewhere, go for it.

[nizm0zed]

I have heard a rumour that the 4ZE1 holden Rodeo injectors are the same as the VL turbo ones.
Im fairly certain there was an early model rodeo that had the hose tail injectors, but most of them were a press fit rail type.

or, if your feeling adventurous, you can dig through here and find something from another vehicle that has the right specs.
http://users.erols.com/srweiss/tableifc.htm

[DatPilot]

I buy mine from 'Dr. Injector" ebay.us
About $40 to $50 each NEW...

you can choose from 280cc, 360cc, 480cc....

But Id buy from dat2kman, at least you can hunt him down and torch his cat if they dont work!

[navanskyine]

188 cc injectors set of 6 at $300 have been flowed and cleaned, ready to install

480cc injectors set of 6 at $400 original Bosch units , used.   Both sets ready now.

Located Brisbane can put in a padded bag and post if anyone else is keen!

Repco or Bursons can order in new ones, will take a few days, but  you said ypu dont want to spend the $$$ on brand new ones, at retail price., as you told me?

Or go to a local wrecking yard and unsrew a set off of something, could be lucky, they might fit!

Ben, i already gave you a "discounted"price, but if you can get them elsewhere, go for it.

DUDE are you serious wow ur wacked u txted me and i still have the orignal txt 200 bucks for the 480 cc's now u want 400 lol ??
and 300 for the 180cc's man seriously all that after me GIVING A FREE car which u sold parts off it and u made money some poeple these days seriously yeh dude
Special when i know ur not short on money seeing ur house and shiver

you change ur pirices like u change ur underwear

200 then 250 now 400 lol yeh ok ...some poeple i swear want everything for free but when it comes the other way they do stupid shiver

[dat2kman]

Sonny jim, go and buy some NEW ones, stop farking around with crap, you say you wont pay retail price for new, so buy second hand.
The above prices are for what i have for sale.
You try to sell me a POS r30 rusted heap, for $400 (in ypur dreams pal) with more stuff removed from it that what we both agreed to. I give no shivere for ypur lame excuses, the oil pump is missing, the head studs are missing, the fantastic diff you said it had was missing, so you said, ok $100 but DUDE where is the oil pump, the studs the diff!
GONE, so i figure fair enuf, ill cut you a deal on injectors, hemce nice price, but now you flame me, so just trot off and get some new ones, they'll set tou back about a hundred apiece!

Tried to help you out with ypur car, but all i get from you is indecision and no answers!!

[navanskyine]

help me how
u said 200 then 250 now 400 yeh ok thats helping yeh sorry rather just buy retail or off someone else
Can u leave the post alone now for some serious people that wanna sell there stuff and not change there prices
K THANKS !