Upcoming Club Events
240z dash
Hey guys I'm chasing a 240z dashboard any condition as long as it able to be restored.
Gauges not req around Brisbane , Gold Coast or Sunshine coast would be swell
Gauges not req around Brisbane , Gold Coast or Sunshine coast would be swell
Categories: Forum Activity
What type of media to use in a blaster
Hi guys, I have a Super Cheap sand blasting cabinet and currently use the Super Cheap sand in it but it is so dusty that I can't see in the window. Its only seen about 10 hours of use and the filter is already blocked so the dust pumps out the door sea...
Categories: Forum Activity
280zx caliper bolt size?
Hey everyone, i have 280zx struts . wondering if someone can answer a quick question.
what bolt size/thread is used to bolt the caliper to the strut?
also the bolts to that bolt the rotor to the hub.
I dont have access to my car for about 2 weeks due t...
what bolt size/thread is used to bolt the caliper to the strut?
also the bolts to that bolt the rotor to the hub.
I dont have access to my car for about 2 weeks due t...
Categories: Forum Activity
Melbourne guys, std caliper front pads, for racing, hook me up, who sells what?
Any Melb guys using stock calipers,
Need contact names and numbers for suppliers of decent pads for S30
Bendix DB 86 is our Z,
but
I can drill pin holes in a BD625 ( Ford Escort/Capri/RS2000 to make fit.
Have been using Bendix Race ( no not Ultimates...
Need contact names and numbers for suppliers of decent pads for S30
Bendix DB 86 is our Z,
but
I can drill pin holes in a BD625 ( Ford Escort/Capri/RS2000 to make fit.
Have been using Bendix Race ( no not Ultimates...
Categories: Forum Activity
f/s garrett gt35/40 and tial 44mm gate
forsale ipswich Qld 0400 328786
brandnew unused genuine garrett 35/40 .7 front, 1.06 Vband rear and genuine tial 44mm gate .9bar spring
bought for project ( manifold in pic sold ) but change of plans
turbo $1550
gate $450
$1900 for both
[URL=http://s...
brandnew unused genuine garrett 35/40 .7 front, 1.06 Vband rear and genuine tial 44mm gate .9bar spring
bought for project ( manifold in pic sold ) but change of plans
turbo $1550
gate $450
$1900 for both
[URL=http://s...
Categories: Forum Activity
Wanted 240Z rear bumper. Any condition
Morning Zedders
Looking for a coupe rear bumper. Can be in any condition. Preferably around Sydney but will consider anywhere.
Cheers
Looking for a coupe rear bumper. Can be in any condition. Preferably around Sydney but will consider anywhere.
Cheers
Categories: Forum Activity
Hey from Tassie
As it says, down here on the little island. I have been the proud owner of a 1979 280zx since 2004. Two tone silver paint, blue silver interior. 53000 k's. We registered and drove it for 6 months, then into the shed. It was laid up waiting for a gearbo...
Categories: Forum Activity
240z or 2-seater 260z rhs/driver door.
Hi looking for a door for my Z. After a shell or full door. Complete or incomplete. Late or early type is ok. Can have some rust in it. Metal or FRP
Let me know what you got.
Let me know what you got.
Categories: Forum Activity
jasonmac's 260Z 2+2 - Carannuation
Well I am very proud to say that I am now an owner of a 75 260Z 2+2. The whole buying process was a lot of fun. The PO and his dad were both really nice, they had a heap of other cars they were working on and decided to make some room and sell this on...
Categories: Forum Activity
L series parts, 240Z 260Z
I have a few spares for sale. Sproket can be posted, everything else is pickup only.
1) Rollmaster vernier cam sprocket used $60
2) 72 deg cam, solid so needs to be used with spray bar. $80
3) 74 deg Works high lift cam, internally oiled. $80
4) P90 he...
1) Rollmaster vernier cam sprocket used $60
2) 72 deg cam, solid so needs to be used with spray bar. $80
3) 74 deg Works high lift cam, internally oiled. $80
4) P90 he...
Categories: Forum Activity
Tyre sizes for factory 14" mags?
Does anyone know from experience if a 215/65x14 tyre on a factory 5.5" 260Z mag wheel will have sufficient clearance to the front spring perches etc?
If OK then that gives me a couple more options - very close to the same rolling diameter as the usual ...
If OK then that gives me a couple more options - very close to the same rolling diameter as the usual ...
Categories: Forum Activity
15x8 and 15x9 tyre options with flares
Hi guys
I have ordered some rota alecia wheels 15x9 -10 offset rear and 15x8 0 offset front
I've got flares to put on what size tyres suit these wheels ?
I have ordered some rota alecia wheels 15x9 -10 offset rear and 15x8 0 offset front
I've got flares to put on what size tyres suit these wheels ?
Categories: Forum Activity
JDM Wheel Imports, has anybody used?
Hi All,
I am looking at getting some wheels from JDMwheelimports.com.au, based in Brisbane. Konig Rewinds.
It looks to be only an on-line shop, no address details. Has anybody dealt with these guys before? Always a little nervous buying on-line. Call m...
I am looking at getting some wheels from JDMwheelimports.com.au, based in Brisbane. Konig Rewinds.
It looks to be only an on-line shop, no address details. Has anybody dealt with these guys before? Always a little nervous buying on-line. Call m...
Categories: Forum Activity
grey zed, forum member with pink wheels / outside trim
cant find in the builds folder. It was somewhere can someone help me?
There was a member that sprayed car in flat grey and had some bright pink trim and wheels i believe. But cant find it now any idea? If i remeber corretly it might be an adeliade ca...
There was a member that sprayed car in flat grey and had some bright pink trim and wheels i believe. But cant find it now any idea? If i remeber corretly it might be an adeliade ca...
Categories: Forum Activity
Car related Hard Copy SPAM
So I received some hard copy spam in the snail mail the other day.
It was from an organisation that offers photos of your car in return for a payment. It seems the payment amount varies depending on the speed of your vehicle. They provided an example p...
It was from an organisation that offers photos of your car in return for a payment. It seems the payment amount varies depending on the speed of your vehicle. They provided an example p...
Categories: Forum Activity
WTB: Pair 280ZX front seat belts and receivers.
HI,
I am after L and R front seat belts and receivers in red or black.
Please let me know what you have.
Thanks everyone.
I am after L and R front seat belts and receivers in red or black.
Please let me know what you have.
Thanks everyone.
Categories: Forum Activity
Adjustable rear lower control arms
Hey Guys,
Doing a full rear end rebuild and wondering if any one had any aftermarket lower rear control arms they want to get rid of?
Doing a full rear end rebuild and wondering if any one had any aftermarket lower rear control arms they want to get rid of?
Categories: Forum Activity
Techno Versions / RT Style Diff mount - Group Buy Full!
Hey Guys,
I need an RT style diff mount for my car and I dont want to pay $51 postage which is nearly as much as the diff mount. The mount itself is $60 + $28 for the energy suspension bush if you want that option.
This will eliminate the dreaded diff ...
I need an RT style diff mount for my car and I dont want to pay $51 postage which is nearly as much as the diff mount. The mount itself is $60 + $28 for the energy suspension bush if you want that option.
This will eliminate the dreaded diff ...
Categories: Forum Activity
Wanted 260z 2+2 maybe 280zx in SA.
Im chasing a cheapish 260z 2+2 or 280zx
Preffer in SA.
Requirements:
Body: as long as is not swiss cheese
doesnt look defectable from accross the road. dont care about rust bubbles scratches dents etc..
Interior: not fussed
Driveline: must run and no...
Preffer in SA.
Requirements:
Body: as long as is not swiss cheese
doesnt look defectable from accross the road. dont care about rust bubbles scratches dents etc..
Interior: not fussed
Driveline: must run and no...
Categories: Forum Activity
Canberra 240z for sale
Spotted this today....
Hopefully no rust as Canberra car from new...1st one Ive seen for a while, and sounds very well priced at $10k..
http://www.allclassifieds.com.au/ac/display-ad?cid=123883304
Hopefully no rust as Canberra car from new...1st one Ive seen for a while, and sounds very well priced at $10k..
http://www.allclassifieds.com.au/ac/display-ad?cid=123883304
Categories: Forum Activity