Latest Topics

Ok i know a while ago a car came up on ebay and we discussed a project Auszcar Build. Now i know that some members would like to keep the parts they have private but remember this is just Theory ie; could it be done.

I have
2 spare cylinder heads
Rear ...

hey guys

posting up for a mate
urethane 240z front bar flexible type may fit 260z $350 ono
white line rear sway bar heavy duty suit 240z may fit 260z $100 ono

call me on  0425 319 100

Peter

Hi All

I am trying to chase up a 240z pedal box. Dont need the pedals just the pedal box. (260z is different)

Thanks
Ash

Hi,I am looking for some advice on which size rim to use on my 2602+2.

I am going to convert rear drums to r31 discs,have already converted the fronts to Hilux calipers and the stock 14 inch rims fit on the front fine.

I can get a good deal on Rota Rbs...

It comes in many different names, (as the title suggests)

Im talking about the brace one may put under their car to improve rigidity, bolted to the chassis rails @ the firewall and close to the diff, made of tube steel.

First of all, Has anyone ever se...

Hi Guys,
          I have a 1976 260z coupe with a faulty vacuum advance cannister. Any ideas on where I could get one in Australia. The Zstore in the USA has them but with a wait of 2-3 weeks and us$103.00 delivered.
Thanks
David.

Hi All,

I need some help identifying what Distributor I may have and or what car it came from?
The car is a Australian 260z with an L26. The Previous owner has told me that sometimes he gets
some parts from the States.

Tried to swap over the cap, rotor...

Hi all just wanted to introduce myself.
I joined up about a month ago but hadn't got around to doing this.

Im James Parkinson, Im 23 and I live in Mclaren Vale South Australia. Im a datsun enthusiast. I have just bought myself another 240z.
I had one a...

Very off topic but.....

I have just got my first proper job.....good firm etc...but it is in Sydney....where I have never lived, nor have any of my family or friends....
so the question is:

Where is a good place to live? (that's affordable but nice (do...

Hi All,

I have a brand spanking new centre console to suit a 260z.
It’s a genuine Nissan Factory Part, still in original box. 

It was purchased from the US some time ago and therefore the console lid opens out the opposite way.

There are blanks for...

Hey Guys, I  need to change the input flange on an r200. Is it just a matter of undoing the nut, tapping off the flange, tapping the new flange on and doing the nut back up the specified tension?

Hello, my name is Zak Smith,
   I am from sydney and my best mate (from brisbane) and myself have been collecting Z's  for nearly 20 years. I have a few cars and quite a lot of parts but unfortunately I have a large work load and very little time to be...

Hi guys,

I purchased the below from another zed enthusiast a while ago.   He was racing his Zed and had upgraded to a larger setup - so picked this up pretty cheap.  Contains the following:

240z - 260z Front and Rear Brake package
Front Calipers - Toyo...

Hi Everyone,
I found this article and thought it would be a good start for anyone looking to rebuild their distributor.

http://www.jrdemers.com/280ZX/distributor/distributor.html

Also found this article on replacing the E12 module (since these give up ...

 Have fitted a 280Z brake master cylinder to my 260Z. I intend to fit 280Z rear (S1) calipers as per tutorial. Using existing 260 front calipers.
 What should i do with regards to the following.
 (1) Do i remove the valve unit from the rear section in ...

Looking for a l28 electronic distributor

Is there any one who sells them new or reconditioned?

Any thing aftermarket at a reasonable price ?

OK I have a spare few elec dissys,

I need one sorted out to suit my turbo setup, as advance on boost is bad!

I have asked a few other workshops and they evidently have NFI what Im on about (well they are kind of right)

So I need to send it to someone,...

Three piece on parts car . $250.00

BRE style boot lid spoiler. $100.00
 Both $30.00 P&P

http://www.bmsc.com.au/forums/buy-sell-rally-cars/24484-fs-modified-datsun-260z.html#post253202

Its probably someone on our forum but I can't see a post regarding these parts.

Giday, as some of you may know i was introduced to Z's through Lurch, via his brother.
Just over a month ago i purchaced a red 260Z 2+2 and have been working on it every chance i have had since then.
I don't know a great deal about the mechanics behin...